Published Sep 1. 2015 - 8 years ago

Rhody Chovy

Articles w/pattern

Originator: 
Page Rogers, Rhode Island USA
Pattern type: 
Cold saltwater fly
Skill level/difficulty: 
Medium
Instruction: 
  1. Tie mono thread onto hook shank, and leave a long tag end or rib coming off rear end of fly
  2. Tie in sparse amount of tail material. Tail should be no longer than the hook shank. Keep the thread back, behind the point of the hook.
  3. Cut a piece of Mylar tubing 2.5 times the length of hook shank.
  4. Slide tubing over the hook shank. Tie down and tie off thread.
  5. Work the hook eye through the tubing, and tie the mono thread back on, right behind the hook eye.
  6. Cut 10 strands of Krystal Flashes to suit bait fish colour.
  7. Folding it over your tying thread, tie the flash in at the head, right at the hook eye.
  8. Whip finish the thread and tie off.
  9. Pull the wing materials back tightly and smoothly and tie them down with several wraps from the tag end.
  10. Flip the fly over in the vise.
  11. Pull the remaining Mylar tubing under the hook shank, so that it forms a nice little swag belly.
  12. Secure the tubing with a few wraps from the tag end and whip finish the tag end.
  13. With scissors, trim all extraneous tubing, as close to whip finish point as possible.
  14. Place prismatic stick on eyes close to hook eye.
  15. Paint on gill.
  16. Cover entire fly body with the epoxy. Bring epoxy a little past end of fly body to prevent tail materials from fouling. Watch out for the formation of a bubble right around the fly's eye.
Materials: 
Hook
Mustad 34007 or equivelant no.4/0 to 8
Thread
White mono waxed thread
body
Pearl or silver mylar tubing
Eyes
Prismatic stick on or equivalent
Wing
Fishhair, Angel Hair, Lite Brite or any synthetic fibers to match length required
Adhesives
Super glue and Epoxy

Log in or register to pre-fill name on comments, add videos, user pictures and more.
Read more about why you should register.